Jinan Mgreenbelt Machinery Co,.Ltd
Manufacture of industrial water chiller,water cooled chiller,air cooled water chiller, glycol chiller; We are a cooling&refrigeration solution provider with 12 years experience from China mainland.
Add to Cart
60HP Industry Air Cooled Water Chiller For Plastic Injection Moulding
Description of Water Chiller For Plastic Injection Moulding:
| Model | Unit | MG-60C(D) |
| Nominal cooling capacity | kcal/h 50HZ/60HZ | 129000 154800 |
| KW 50HZ/60HZ | 150 180 | |
| Set temp. range | 5ºC~50ºC | |
| Input power | KW | 61.84 |
| Power supply | 3PH-380V-50HZ (200V/220V/415V-50HZ/60HZ) | |
| Refrigerant | Type | R22/R134a/407c |
| Type of control | Thermostatic expansion valve | |
| Compressor | Type | Hermetic scroll |
| Power(kw) | 10.6*5 | |
| Condenser | Type | Finned copper tube+low noise outer rotor fan |
| Cooling air flow(m3/h) | 60000 | |
| Evaporator | type | Tank with coil/shell and tube |
| Chilled fluid flow(m3/h) | 30.57 | |
| Volume(L) | 750 | |
| Inlet and outlet pipe diameter(inch) | DN80 | |
| Pump | Power(kw) | 4 |
| Lift(m) | 20 | |
| Dimension | Length(mm) | 2900 |
| Wide(mm) | 2000 | |
| High(mm) | 1900 | |
| Weight | kg | 1650 |
| Safety protection | Compressor over temperature,over current,high and low pressure,Phase sequence,phase-missing | |
Main parts of Water Chiller For Plastic Injection Moulding:
Our industrial using air cooled water chiller adopt famous brand components to ensure the high quality and good performance for your usage. Popular PLC control system which show out working condition of each parts, and touch screen operate,to be controlled easily and powerful. Main four parts below:
| Compressor brand | Copeland,Sanyo, Danfoss | Temperature Controller | PUNP, PLC | |
| Electrical components | Schneider | Expansion valve | EMERSON | |
| Water pump | CNP/MINAMOTO | Dry filter | DANFOSS | |
| Evaporator | MGreenbelt | Condenser | MGreenbelt | |
Package:
1). Fumigation-free wooden case for each Glycol chilling unit.
2). Chiller machine will send to Qingdao loading port if clients don't have any special requirements.
Payment terms:
T/T: 50% Down payment, the balance before shipment, or you also can show us if any special required.
L/C,D/P,DDU and etc.
| Contact preson:Grace Zhang Cell:0086018615626360(calling,whatspp,viber,weichat) Email:cnmgchiller@gmail.com Skype:mb.gracezhang |
Looking forward long and good cooperation from all over the world! MGREENBELT will give you the 5% discount and good service.